T-Cut Grey Scratch Remover Color Fast Paintwork Restorer Car Polish - 500ml plus a Wax Applicator Set with Handle * 13 Colours Available

Product Information

Yes, T-Cut can be used to improve headlight clarity and light visibility by removing haziness from clear, plastic headlights. It can also be used on window and plastic glass to improve clarity and add shine. To do so though, ensure you buy the right version of T-Cut. Coloured versions will not help with restoring headlights, for obvious reasons. Can it remove excess lacquer? When using T-Cut, safety should be your priority. Always ensure you’re in a well-ventilated area and wear gloves to protect your skin. Common Mistakes to Avoid Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’). As mentioned a couple of times through this article – there are several times where T-Cut is not the right solution. If tcut is not right for you, if the scratches are too deep or if you want expert guidance when fixing scratches to avoid any accidental damage, then this is where ChipsAway come in.

T-Cut is a type of car scratch remover, that is also known as a rubbing or cutting compound. A well-known brand in the car care industry, T-Cut is used to remove light surface scratches, marks and scuffs on car paintwork. There are several different types of T-Cut available, including the original restorer fluid, rapid scratch remover, T-Cut Colour Fast, the T-Cut Scratch Magic Pen, and a T-Cut metal polish. Does T-cut actually work? Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution. Since the top, protective layer has been removed, the car now needs to be waxed on a regular basis to prevent corrosion. Waxing is a vital step to remember, as the last thing you want to do, when removing damage from a car, leaves it vulnerable to more damage at a later date. Remember, T-Cut is not an instant fix. It requires time to penetrate the scratches and start the cleaning process. Frequently Asked Questions about Using T-Cut Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish. Not to mention, through buffing any excess tcut away, you remove any potential damage from unnecessary drips.T-Cut Colour Fast – Removes scratches, scuffs and blemishes whilst adding colour. Suitable for red, white, blue or silver car paint. There are other cases where applying tcut yourself, or trying to repair the scratches yourself, are not recommended. If you are unfamiliar with repairs

This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then tcut will need to be applied all over, one panel at a time, and will requires several containers of tcut to ensure you have enough of the compound. If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over. T-Cut After Care In fact, ChipsAway repairs all come with a lifetime guarantee, all for less hassle and cost than going to a body shop or garage. In fact, most body shops would repair a scratch by repainting the whole panel, whereas ChipsAway specialists only need to repair the small area affected – and you can keep your car for the day as ChipsAway come to you. ChipsAway specialists are experts in car scratch repair. We have a unique and fully mobile paint matching system they use means that, not only are you removing the scratch, but repainting it with the correct, precisely mixed colour and finishing it with the same lacquer seal as before. As this process restores the damaged area, there is no need for time-consuming waxing afterwards.Yes, T-Cut can help remove excess lacquer. Lacquer overspray can easily be removed with the Original T-Cut cutting compound. Can it remove spray paint? Of course, no matter how it may not be ideal for deeper scratches, T-Cut is great for that top layer. To apply T-Cut, it is a very simple process. T-Cut Metallic Colour Restorer – Less abrasive than T-Cut original, so it is more suited for sensitive paint finishes, specifically for metallic surfaces and pearlescent paintwork.

Whether you’re contending with the rigours of daily commuting or the fallout of a minor mishap, maintaining the integrity of your car’s vehicle paintwork can pose quite the challenge. Over time, cosmetic damage, such as minor scratches and minor marks, can detract from your vehicle’s appearance. Thankfully, the T-Cut Solution can help restore your car’s former glory. What is T-Cut? The T-Cut Original range is a stalwart in the car care industry, renowned for its scratch removal formulas. Originally conceived to reinstate the original colour and shine of vehicle paintwork, T-Cut products have earned a loyal following among car owners worldwide. Today, the T-Cut range includes for diverse metal surfaces: T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months. T-Cut Colour Fast is perfect for restoring the original colour of your car, while T-Cut Rapid Scratch Remover is a favourite for handling light scratches. If you’re dealing with metallic paintwork, then T-Cut Metallic Colour Restorer is your go-to. For those with stainless steel, Tetrosyl Cutting Oil will be your best friend. Instructions for Using T-Cut on Your Car’s PaintNot all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for?